Filter By:
- Parts & Accessories (16)
- Wheels (3)
- Hubs (2)
- Rims (1)
- Spokes (6)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels

$2,550.00
What It Is
A purpose-built XC wheelset without limitations. Light enough to race, strong enough to ride daily. Reduced fatigue and a more compliant ride through shape, laminate, and spoke-hole optimization.
Who It's For
Modern XC racers and riders who demand equal uphill and downhill performance, light weight, durability, and vertical compliance for long hours in the saddle.
Why We Made It
Carbon fiber is responsible for unlocking the potential of bigger and wider tires on mountain bikes. Today, riders can improve comfort, efficiency, and control by adapting their mountain bikes perfectly for the terrain and trails. Undoubtedly, this means they can go further and faster with more confidence. Complement increased tire volumes and rim widths with a modern XC tread, and you've got an effective system, maximized for the variable-pitch trail. The result is a purpose-built full-carbon fiber XC wheelset that is lighter, wider, and more vertically compliant without sacrificing strength or reliability. Additionally, the M525 features ENVE's patent pending, wide hookless beads that improve pinch flat resistance and allow riders to run modern lightweight XC tires with a reduced risk of pinch flatting or impact damage.

$1,750.00
ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders.
- 30mm internal rim width
- Gravity rated impact strength
- Rim shape tuned for compliance and damping
- Wide Hookless Bead Anti-pinch flat technology

$54.19 - $440.95
DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels.
- Straight pull spoke blanks
- Nipples sold separately

$135.00 - $154.00
High quality sealed bearing hub is available in traditional and modern configurations.
- Steel axle, aluminum end caps with steel knurled contact surfaces
- Same proven driver mechanism as higher priced models
- Spoke Interface: J-Bend
- Hub/Brake Compatibility: 6-Bolt Disc
- Skewer Included: No
- Bearing Type: Sealed Cartridge

$127.90
Modern welded XC rim, developed with a 25mm inner width.
Modern-day XC rim: The right width to run wide tires necessary to be competitive on today's demanding Cross Country courses. The welded construction of the XR 391 and the bead-blasted, anodized finish are on par with your high-end XC ride. The use-specific profile, the custom alloy, and the use of the PHR nipple interface allow you to pair the unpairable: Wide, strong, and light.

$93.90
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches
- Cold forging technology, CrNi stainless steel with rolled threads
- No hub slotting necessary
- 139g (32/265mm)
- Box of 20
- Nipples sold separately

$88.79
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- One 264mm spoke = 6g
- Nipples sold separately

$76.90
Direct power meets simplicity—running smoothly day-in and day-out.
The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

$9.00 - $53.00
Whisky’s tubeless rim tape is designed to make setup as easy as possible. Elasticity allows for smooth, even adherence while translucency lets you see where the tape contacts the rim. Different widths available to fit almost any rim.

$43.90
- Straight gauge 2.0mm with cold forging technology
- Chrome nickel stainless steel with rolled threads
- 222g @ 32h/265mm
- Box of 100
- Nipples sold separately

$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure.
- CNC-machined from 7000 series aluminum
- Designed to fit all current Salsa thru-axle frames
- For other frames, check with the manufacturer for compatibility and other specifications
- 6mm hex wrench required for installation

$38.90
Maximum stiffness and highest safety—the RWS Quick Release for road and MTB.
Our patented RWS axle system is stiffer, safer, and easier to use than conventional quick-release axles. The RWS quick release is absolutely reliable and offers a strong connection to the frame. The perfect choice for anyone who is looking for maximum performance and safety.

$12.50 - $29.00
Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings.
- 26mm OD x 15mm ID
- 7mm thick

$11.25 - $25.00
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3

$20.00 - $23.00
Rear end cap conversion kits for NoTubes Neo and Neo Ultimate hubs
- SealLock end caps feature a low friction U-cup seal that snaps into place

$21.41
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels.
- Double Butted: 2.0/1.8/2.0
- Compatible with straight pull hubs only
- One 264mm spoke = 5.9g
- Nipples sold separately

$20.00 - $21.00
Front end cap conversion kits for NoTubes Neo and Neo Ultimate
- SealLock end caps feature a low friction U-cup seal that snaps into place

$12.99 - $17.99
Tubeless setup made easy with valve stems designed to work as a system with Bontrager wheels, tires and rim strips
The valves you need to upgrade to Tubeless
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Product details
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Use only with Bontrager TLR rim strip with rectangular base
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Sold as singles

$9.99 - $15.99
These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance.
Key features:
- To be used exclusively with Bontrager Tubeless Ready (TLR) wheels
- Required for Bontrager's Tubeless Ready (TLR) system setup
- Removable valve core for easy sealant fill
- Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40
- Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

$15.99
- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels
- TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion
- Rim Strip replacement is recommended if removed from the wheel

$6.18 - $9.79
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$9.00
Replacement springs and pawls. Includes 6 pawls, 6 springs and 1 plastic retaining ring that holds the pawls in place even during disassembly to ensure you're never searching the floor for tiny springs.

$5.50 - $6.50
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal wheel magnets work with any speed sensor
- Thread-on speed magnet is positioned closer to the sensor for improved signal
- Aero speed magnet provides a sleek, low-profile, aerodynamic solution
Page 1 of 1