Filter By:
- Bottom Brackets (4)
- Brakes/Levers/Pads (31)
- Cables (11)
- Cassettes/Freewheels (9)
- Chainrings (10)
- Chains (17)
- Cranksets (3)
- Derailleurs (7)
- Show More Categories
- Forks (1)
- Groups (1)
- Handlebar Grips/Tape (11)
- Handlebars (5)
- Headsets (5)
- Pedals (12)
- Saddles (2)
- Seatposts (5)
- Shift/Brake Combinations (2)
- Shifters (6)
- Stems (2)
- Other (58)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$753.00
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready.
- XC focus and trail ready
- Carbon cage
- Ti hardware
- Rainbow colorway
- Eagle technology
- Overload Clutch protection
- AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components
- System is completely water and dust proof to IP69K
- Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available.
- Battery sold separately

$633.00
The day-in, day-out Eagle ecosystem hero is now available with AXS. The GX AXS upgrade kit is your entry point into wireless drivetrain simplicity. Compatible with any of our Eagle ecosystem cassettes and crank arms, the upgrade kit allows you to experience AXS without needing to buy an entire groupset—provided you already are using Eagle products. No matter if you are looking to upgrade your ride or looking for great value replacement parts, look no further than the GX AXS upgrade kit.
- Includes the SRAM GX Eagle AXS rear derailleur with battery, Eagle controller with clamp, charger with cord, and chain gap tool
- The GX Eagle AXS rear derailleur shifts on command, whether under climbing load or sprinting to the stage finish, and is smart enough to protect itself thanks to its incredibly resilient Overload Clutch
- Rear derailleur is compatible with 10-50t and 10-52t cassettes
- The GX Eagle AXS controller offers a unique wireless shifting experience with ergonomic touchpoints that are customizable to your preferences. You can choose what each button does through the AXS App

$415.00
The XG-1295 cassette carries with it the X-DOME architecture, which, independent tests have concluded, yields the strongest cassettes on the market. Shifting characteristics improve both inboard and outboard shifting as well as chain retention.
- SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight
- All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance
- XD driver body compatible
Cogs
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

$349.95 - $379.95
The Wolf Tooth Resolve Dropper Post is the first dropper post to use a self-bleeding cartridge. It has the shortest stack height of any dropper post on the market, has a short insertion depth, is one of the lightest dropper posts, and is completely serviceable at home.
- Self-Bleeding Resolve Cartridge: At the heart of Resolve Dropper Post is a self-bleeding cartridge that removes air from the fluid chamber with every actuation. All dropper posts can get air in the chamber, which leads to sag and squish. Resolve Dropper Post is the only dropper post that purges air from the chamber, which means you'll never need to buy a new cartridge as you do with all other dropper posts.
- Shortest Stack Height: The shortest stack height of any dropper post means that Resolve can get your saddle lower than any other dropper post. The lower your saddle, the more room you have to maneuver your bike on drops and techy descents.
- Weight and weight per travel is equal to the best: Resolve Dropper Post is one of the most lightweight dropper posts on the market when it comes to grams per millimeter of travel. It's as much as 26% lighter than other dropper posts of the same travel size.
- Short Insertion Length: When a dropper post has a short insertion length, longer travel options are unlocked for more bikes. A short insertion length is vital for smaller bikes, frames with curved seat tubes, and frames with seat tubes that have bottle bosses.
- Travel Reduction with Spacers: The travel length of your Resolve dropper post can be customized in order to suit your bike and saddle height. Spacer kits are sold separately or those who would like to have the adjustment made later by their local shop mechanic. If you are comfortable with working on suspension components, you may be able to complete the installation yourself.

$317.99
The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort, and the textured, anti-slip brake lever increases control on bumpy terrain.
- Gravel inspired lever and bracket ergonomics
- Anti-slip brake lever
- Greater mixed-terrain control
- Same light shifting operation as top tier road systems
- Excellent heat dissipation
- Flat mount
- Convenient tool access
- Simple wheel replacement
- Easy and clean bleeding system
- Never hesitate to tackle rough surfaces
- Simple set up and maintenance

$282.99
The Shimano GRX Dual Control Lever delivers light and responsive shifting for mixed-terrain riding. The ergonomic shifter design improves comfort and the textured, anti-slip brake lever increases control on bumpy terrain.
- Gravel-inspired lever and bracket ergonomics
- Anti-slip brake lever
- Greater mixed-terrain control
- Same light shifting operation as top-tier systems
Left/Front
- ST-RX810-L: Shimano GRX - Hydraulic Disc Brake - Dual Control Lever - 2 x 11-speed
Right/Rear
- ST-RX810-R: Shimano GRX - Hydraulic Disc Brake - Dual Control Lever - 11-speed

$249.00
The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard.
- 511% range is great for modern 1x drivetrains
- 10 steel cogs, plus 1 aluminum cog increase durability
- Saves weight by using smaller chainrings and shorter chains, which also provides better ground clearance
- Designed for use with eBike drivetrains
- Compatible with Shimano and SRAM drivetrains
- Cassette Body Type: SRAM XD 11/12 Speed
- Cassette Cogs: 9-10-12-14-17-20-24-28-33-39-46
- Drivetrain Speeds: 11
- Color: Black
- Weight: 390 g

$240.00
The Salsa Cowbell blends speed, comfort, and efficiency for high performance efforts on gravel and paved roads. Designed with gravel racing and riding in mind, Cowbell bars feature a 12° flare that puts your hands, wrists, and arms into a natural, comfortable position in the drops.
- Lightweight and strong 7050-T6 series aluminum alloy construction
- 115mm drop, 68mm reach, 12° flare angle, 12° drop angle
- Available in 38, 40, 42, 44, and 46cm widths
- 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars
- Weight: 281g (44cm)

$231.00
Ride anywhere with this wide range XG-1275 cassette—it always provides the right gear. Fast on the flats. Control on the climbs. Dictate your own pace, anywhere. FULL PIN technology uses lightweight, stamped steel cogs held together with high-strength stainless steel pins. The result: a cassette that’s light and strong. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. X-GLIDE2 improves both inboard and outboard shifting, as well as chain retention.
- Cassette Body Type: SRAM XD
Cogs:
- 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50
- 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

$229.99
With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads.
- 10% stiffer than previous generation M8000 even under high-temp conditions
- Quicker brake engagement with a shorter free stroke
- Tool-free reach adjustment
- Free stroke adjustment
- I-SPEC EV Clamp Band
- Brakes are pre-bled for convenient installation

$229.99
Deore XT M8100 hydraulic disc brakes are designed to provide high-performance braking for a variety of MTB riding styles.
- BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding
- Servo Wave Action technology means quicker brake engagement with shorter free stroke
- The BR-M8120 4-piston caliper is designed for tough enduro trails
- Set includes brake lever, caliper, finned metal pads, and hose
- Brakes are pre-bled for convenient setup

$199.99
The X-Fusion Manic post uses internal cable routing and was designed around a low-profile seat cradle and seal collar to fit a broad range of frames. The mechanism is air-sprung and hydraulically locked. The remote can be run on the left or right, above or below the handlebar, but is optimized as a left shifter replacement for 1x drivetrains.
- Cable activated, hydraulic action, infinitely adjustable travel
- Double key-way design prevents lateral twisting
- Double bolt clamp with a wide range of seat angle adjustment. Fits both standard and 7 x 9 mm Carbon Rails
- Sealed cartridge internals for quick replacement
- Low profile head-seal and saddle clamp increase useable travel

$190.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide.
BETTER MUD CLEARANCE
- Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence.
ADDED EFFICIENCY + DURABILITY
- Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center.
LARGER CONTACT AREA
- The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy.
BETTER MUD CLEARANCE
- Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

$179.99
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar.
Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides.
- Oversized 35mm Bore Carbon Handlebar
- Designed for Enduro / All Mountain / Trail
- Developed and designed exclusively with our own in house DEITY molds
- Unidirectional Carbon Construction
- Damping properties reduce hand fatigue
- 800mm Width
- 9 degree bend x 5 degree upsweep
- The ultimate combination of strength, weight, and ride quality
- Textured non slip stem clamping surface
- Textured grip ends for added bite
- Covered by our Lifetime Crash Replacement Policy to the original owner
- Recommended MAX Torque Spec range (4 - 4.5 Nm)
- 15mm rise: 222 grams
- 25mm rise: 226 grams

$179.99
TMAC Signature Tyler McCaul Pedal. With over two years of development features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint.

$179.00
Experience the performance and feel of the XX1 Eagle shifter, and you'll quickly realize there must be something special going on inside this little nerve center. And there is, to the tune of time-tested and race-tested X-ACTUATION technology, adjustable lever positioning, and that buttery feel of XX1 Eagle. It features a carbon trigger and cover for our lightest weight shifter, while the trigger glides on precise, near-frictionless sealed cartridge bearings. Thanks to Eagle Colorsystem and the XX1 Eagle master group colorway, all-new looks let creativity soar, making the XX1 Eagle shifter the rider's faithful and ultimate touchpoint for the curation of the race or dream machine.
- Adjustable carbon trigger and cover reduce weight
- Discreet clamp or Matchmaker-X compatible

$169.99
The Deore XT M8100 hydraulic disc brake is designed to provide high performance braking for a variety of MTB riding styles. Includes the brake lever and disc brake caliper.
- BL-M8100 features a stiffer brake lever design that provides added support for aggressive riding
- Servo Wave Action technology means quicker brake engagement with shorter free stroke
- The BR-M8100 2-piston brake caliper is optimized for cross country riding styles
- Includes finned metal pads and hose
- Brake Caliper Type: Post Mount
- Hydraulic Hose Length: 1000mm (Front) / 1700mm (Rear)
- Hydraulic Fluid Type: Mineral Oil
- Rotor Included: No
- Pad Compound: Metallic

$139.50 - $169.50
The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs.
Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More.
When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy.
FEATURES
- 10 rear loading custom hexagonal removable pins per side for maximum grip
- Ultra thin leading edge chamfered design to deflect off any obstacle
- Fully sealed and serviceable design with built in bearing extractor
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
SPECS
- Weight: 365g
- Platform Size: 115x105mm
- # of Pins: 10 per side
- Axle Material: Chromoly steel
- Height: 8.3-12mm
- Pin to Axle distance: 112mm
- Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick
- Body Material: 6061-T6 Aluminum
COMPATIBILITY
- Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
- These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

$164.99
The Shimano Deore XT CS-M8100 12-speed cassette is optimized with rider-tuned wide-range and close step gear combinations for MTB excellence.
- Shift ramp designs provide fast and smooth shifts by HYPERGLIDE+ technology
- Light and stiff construction reduces cassette inertia resulting in faster acceleration and increased chain security
- Designed with a Shimano Micro Spline body that features smaller and more widely distributed splines to limit cog damage on freehub
- Cassette Body Type: Shimano Micro Spline
- Cassette Cogs: 10-12-14-16-18-21-24-28-33-39-45-51
- Drivetrain Speeds: 12
- Range: 10-51

$159.00
No matter how difficult the trail terrain, Magura's 4-piston technology and novel new ergonomics in the brake lever give you a performance package which will fill you with confidence. The MT5 is also perfect for S-Pedelecs. The aluminium, two-finger brake levers are ergonomically perfect for your hands, allowing you to easily and accurately apply the braking power you need, even during long braking actions. Their use of Carbotecture technology in the brake handle housing keeps the MT5's weight down to a minimum and provides optimal braking performance.
- An evolution of the MT line, the MT NEXT lineage of brakes is the next generation of braking performance
- Carbotecture Body which is a proprietary carbon weave that is nearly twice as strong as carbon laminates, aluminum or magnesium
- Carbotecture radial design master-cylinder/lever with 2-finger alloy lever blade and clamp with adjustable reach, flip/flop design, and EBT or Easy Bleed Technology port on reservoir
- Double Arch forged 4 piston monoblock caliper design that features anti-heat, anti-drag and anti-squeal and magnetiX brake pad system for easy pad replacement
- Full-hydraulic Magura Royal Blood mineral oil system with a 5-year leakproof warranty
- Includes flip/flop front or rear lever, 2000mm pre-bled tubing kit, 74mm post-mount caliper, MC/lever, alloy hardware, tubing shortening bits, and manual

$158.00
Simplicity and performance made for all day adventures. The pure shifting performance of Eagle AXS is now available with GX. Shift under load, over the roughest terrain, uphill, without changing your grip on the bar. GX Eagle AXS changes your level of control on the bike when you're under pressure and pushing hard. More than that, it changes your relationship with the bike. No cable, housing or wires to manage opened up design and engineering possibilities with the GX Eagle AXS controller. Featuring the proven ergonomic touchpoints that make shifting effortless, they are customizable to your preferences, allowing you to choose which button does what through the AXS App.
- AXS enabled componentry software makes it possible to both program and personalize compatible SRAM and RockShox components
- Touchpoints are totally customizable to your preferences, allowing you to choose which button does what through the SRAM AXS App
- Customize inboard and outboard shift options
- Compatible with SRAM MatchMaker X
- System is completely water- and dust-proof to IP69K
- Pairs with all derailleurs in the SRAM Eagle AXS ecosystem

$44.00 - $152.00
Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 22 compact crank, these are the rings for you.

$149.99
The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.

$35.00 - $140.00
KMC X12 chains feature a double X bridge shape for fast and smooth shifting.
- Compatible with SRAM 12-speed systems
- Double X bridge shape with inner and outer plate chamfering for smooth and fast shifting
- Mushroom riveted pins for the highest pin power and allows shifting under heavy loads
- 1/2 x 11/128
- 126 Links

$135.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem.
- Backward-compatible—works with both 10-50T and newer 10-52T cassettes
- Updated cage architecture provides better chain retention and precise shifts

$131.00
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever.
• X-Actuation for precise and dependable 11-speed performance
• Focused chassis design for all conditions and usage
• 10-42-tooth wide range cassette compatible

$129.60
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 54T

$125.00
- Large pedal platform
- Lower platform height for pedaling stability
- Robust retention claws provide smooth engagement and release
- Customize the entry and release tension settings
- Strong, durable chrome-moly spindle with 8 mm hex wrench mount
- Sealed mechanism
- SM-SH51 Cleat included
- 1.0 mm cleat spacer included
- Binding: Dual sided
- Cartridge axle
- Cleat retention adjuster
- Average weight: 342g
- Optional cleat: SM-SH56
- Pedal Type: Off-Road (SPD)

$119.99
Black Kat pedals are built around a larger double sealed bearing sytem, With a larger platform, thinner body and over all lighter appeal, these pedals bring great value. By utilizing a concave shape to the platform, rounded edges at the spindle, traction grooves throughout and included an additional pin kit with every purchase.
- Extruded and CNC Machined 6061 T6 Aluminum
- 100mm x 100mm platform
- Concave body
- Fully Serviceable DU Bushing and Double Micro Sealed Bearing System
- Intended Use: Downhill, FR/DJ, Enduro, All Mountain
- Allen bolt style pins
- Additional Allen Pin kit included
Page 1 of 7
Next page