Other
$21.00
RockShox 35mm Seal Kit
$73.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$85.00
RockShox Reverb/Reverb Stealth IFP
- Fits Reverb and Reverb Stealth
$85.00
Service kit to assist in scheduled maintenance and/or rebuild of RockShox dropper seatposts.
$106.00
Upgrades your 1x bike to the familiar ergonomics of a left shift lever.
$173.00 - $179.00
RockShox XLoc Parts
$9.95
This top cap perfectly matches the graphics on all new Ritchey Comp stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included.
- Material: alloy
- Includes top cap, bolt, and plastic cap
- Fits with 1-1/8" stems
- Weight: 8g
$6.00
Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$9.99 - $19.99
The Problem Solvers Single Chainring Bolts include 5 chainring bolts and nuts that are 6mm wide. This is the right size for most single-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$39.99
The Problem Solvers Direct Mount Adapter gives you a place to install direct-mount Shimano and SRAM derailleurs. It was initially developed for standard mountain bike frames with 68/73mm wide bottom bracket shells, and is equally suited to fat/snow bikes, where their 100mm wide bottom brackets make front derailleur applications a little difficult. The adapter is made of light and durable 6061 aluminum.
$1.20 - $36.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$4.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$5.50
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs
$10.00 - $12.00
- Missing links to make chain installation, maintenance and reparation easier
- Card of 2
$7.71
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$9.48
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$25.00
Seal kit replacement for Diamond model suspension forks.
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$3.40
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Star Ratchet Spring
$4.80
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Spacer Sleeve - 15.4mm, for ratchet
$16.30
Bearings for maintaining and rebuilding DT Swiss hubs.
- DT Swiss 6805 Bearing
$129.60
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss Star Ratchet Kit - 54T
$10.99
40-Series Bearing
- Compatible with 110-, 40-, and 10-Series headsets
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Durable steel construction
Previous page
Page 2 of 2