Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Tools & Tuning

$40.00 - $300.00
The 5 series is the hardest wax in the HS line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It’s a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. - HS5 can be used as a race wax alone or as a base for top coats. - Recommended iron temp: 150°C (311°F). - -10°C to -18°C (14°F to 0°F).
$40.00 - $300.00
HS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. HS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS6 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 155°C (311°F). Highlights: - Fantastic allround glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Exists also in liquid - Well tested on many conditions
$40.00 - $300.00
HS7 performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. Can be used as a racing wax at low air humidity, but will also serve the purpose as a brilliant training wax. The speed of the iron should be approx. 8-10 sec. on a skating ski or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. HS7 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (302°F). Highlights: - Fantastic allround-glider - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$40.00 - $300.00
A great wax for both base-prep and training. It can also be used as a race wax, preferably used with a top coat. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Replaces the LF8X. Highlights: - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$80.00 - $300.00
TS5B - Top Speed 5 Black. Excellent dry-friction properties! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The 5 series is the hardest wax in the TSB line, and is a great choice in cold conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after approx. one minute. Important to have a good iron to get an efficient melting of the wax. TS5B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 160°C (320°F)
$80.00 - $300.00
TS6B - Top Speed 6 Black. An undisputed favorite in cold conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. The TS6B is the second hardest wax in the TSB line, and is a great choice in typical winter conditions, both for alpine and cross country. It is loved by servicemen, due to its great durability and properties when the snow is dirty. This is achieved thanks to the black solid lubricant additive that also reduces friction when very cold snow. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. TS6B can be used as a race wax alone or as a base for top coats. Recommended iron temp.: 155°C (311°F).
$80.00 - $300.00
TS7B - Top Speed 7 Black. A great racing wax for typical winter conditions! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS7B is a versatile wax suited for normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end-result. The solid lubricant additive reduces the friction in cold conditions and in contaminated snow. It’s a very popular wax both in alpine and cross country and has shown good properties on artificial snow in addition to natural, transformed older snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS7B can be used as race wax alone but is often used as base for top coats. Recommended iron temp: 150°C (302°F).
$80.00 - $300.00
TS8 - Top Speed 8 red. Great dirt resistance! The TSB series are gliders for competition that works extremely well on dirty snow and when dry friction conditions. TS8B is made harder than the std TS8. The adjusted hardness makes the wax more durable and absorbs less dirt. The solid lubricant additive reduces the friction in contaminated snow. Excellent results in artificial snow as well as natural transformed older snow, especially noticeable when used alone. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. TS8B can be used as race wax alone but is often used as a base for top coats. Recommended iron temp: 150°C (302°F).
$210.00
Waxing profile for cross country skis. Stable economy profile in aluminum and plastic. Lightweight and easy to adjust. Same profile at front and rear so can be used in both directions. Consists of two parts (each approx. 110 cm) that fit into each other and thereby take up little space for transport and storage. Adjustable in length from 150 cm to 210 cm. Can be used with legs T0079-1 or T0790-K clamps. Weight: 1.8 kg. - Waxing profile - For prepping cross-country skis - For keen cross country skiers - Lightweight and easy to adjust
$160.00
Space efficient and stable! Wax table, perfect at home or at events. Waxing table that is easy to fold together. Comes with four rubber feet for anti slip. One leg adjustable for better stability on uneven surfaces. Adjustable height: 87 cm, 85 cm or 75 cm. Fits two sets of cross country waxing profiles (T0766). Table top 120 cm x 35 cm. Net. weight: 11 kg/24 lbs.
$15.00 - $120.00
PS10 is an economic training and racing wax as well as base prep wax for warm skis. Easy to melt and very convenient to work with. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 120°C (248°F). - A versatile wax for warm conditions - Low melting point and easy to apply
$15.00 - $120.00
The PS5 is the hardest wax in the line, and is a great choice in cold conditions, due to its great durability and dry friction properties. It's a great choice both for alpine and cross country. Despite being a wax for cold conditions, the melting point makes it easier to apply than many competitors in this area, without sacrificing the great glide properties. For fresh, old, or manmade snow. The speed of the iron should be approx. 8-10 sec. on a skating ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Scraping after appr. one minute. Important to have a good iron to get an efficient melting of the wax. PS5 can be used as a race wax alone or as a base for top coats. Recommended iron temp: 150°C (311°F) - Recommended iron temp: 150°C (311°F). - Replaces the CH5X. - -10°C to -18°C (14°F to 0°F).
$15.00 - $120.00
PS6 is very versatile. Its area of use stretches from underlayer for powder to racing wax and base prep wax for cold skis. PS6 has good durability and offers great performance on natural and artificial snow. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. Important to have a good iron to get an efficient melting of the wax. PS6 can be used as a race wax alone or as a base for powders and other top coats. Recommended iron temp: 145°C (293°F). - Recommended iron temp: 145°C (293°F). - Replaces the CH6X - -6°C to -12°C (21°F to 10°F).
$15.00 - $120.00
PS7 is a wax that performs great in normal winter conditions below the freezing point. Its hardness makes it convenient to work with and easy to get a good end result. PS7 is an economic training and racing wax as well as an all-round base prep wax. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 140°C (284°F). - Recommended iron temp: 140°C (284°F). - Replaces the CH7X. - -2°C to -8°C (28°F to 18°F).
$120.00
Waxing profile for when you are traveling. For prepping cross-country skis. - Travel profile - For cross-country skis - For skiers on the go - Takes up minimal space
$40.00 - $100.00
HS10 is a great base prep wax, but also a great training wax. Ideal in warm conditions, typically during spring skiing. For racing, we recommend going with a top coat as the final layer. The speed of the iron should be approx. 8-10 sec. on a skating or alpine ski. The wax can be re-heated after cooling to room temperature (10 min) for better durability. It's important to have a good iron to get an efficient melting of the wax. Recommended iron temp: 150°C (302°F). Details: - A popular wax in nordic disciplines - Good water repellent properties - Replaces LF10X - For training and competition Highlights: - For warm conditions - Easy to work with - For training and competition - Great performance and durability - Fluoro-free and non-toxic - Well tested on many conditions
$100.00
Merino wool, 100mm version, 20mm long wool hairs. A new and revolutionary way of applying waxes without the need of a waxing iron. The method is tailor-made for harder waxes, such as the Marathons and is applied onto the skis in two simple steps: Start by applying the wax to the roto brush by touching the wax to the wool for a few seconds while running the drill at a speed of approx. 1.500 RPM. Then, use the roto brush on the base with a speed of approx. 1.500 RPM. Use light pressure. Start from the tip and move back and forth approx. a foot at a time towards the tail (three times applying the wax and three times polishing). - Roto wool - Trendy waxing technique - Used in World Cup - Perfect with fluoro free ski wax - Easy to use - No heat needed
$90.00
Racing favorite! High quality roto fleece. Effectiv when there are many skis or boards to prepare. The Fleece-Roto improves Cera F Powder and Cera F Solid performance. Apply the Cera powder to the base with a wax iron first. The Fleece-roto should be used a couple of times to get optimal performance. NB! Use separate Fleece brushes for each type of Cera F. 100 mm wide.
$80.00
Designed specifically for wet conditions and dirty snow. The black additive helps reduce friction and reduces the amount of dirt that sticks to the base. As well as being superb in wet conditions, this wax is also highly competitive in colder weather. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C. - Durable glide wax - A favorite for classic long-distance skiing - Hard wax - Can be used with roto wool - For all skiing - Ski wax
$80.00
Designed specifically for longer distances on newer and clean snow. Excellent in warm conditions, but also very competitive at lower temperatures. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. Scrape after waiting about one minute. It is important to have a good waxing iron in order to melt the wax efficiently. Recommended waxing iron temp.: 155°C.
$80.00
A liquid topping designed for racing use. Specifically designed for cold conditions, down to -12°C. TS06L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. Hold the bottle 10-15 cm above the ski base and spray on a thin layer. To even out the product and remove excess liquid, we recommend brushing with a felt cork (T0021) immediately after application. Then allow the product to dry and polish with a nylon brush. For better wear resistance, we recommend rubbing in the product using Roto fleece (T0018F-2) after it has dried and then polish it with a nylon brush. - Liquid yet durable - Excellent as a topping base - Gives excellent glide in cold conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships
$80.00
The easiest way to achieve good glide for racing or training. Recommended at temperatures from -2°C to -8 degrees. - Liquid yet durable - Excellent as a topping base - Gives good glide in varied conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships
$80.00
TS10B is harder than the other T10’ products of the PRO system. The extra hardness makes the wax more robust and so absorbs less dirt. The black additive reduces friction in polluted snow. This is particularly noticeable when the wax is used alone. The wax has very good test results on artificial snow and snow transformed into old natural snow. The speed of the waxing iron should be approx. 8-10 seconds for a skating or alpine ski. The wax can be reheated after cooling to room temperature (10 min.) for better durability. It is important to have a good waxing iron in order to melt the wax efficiently. TS10B can be used as a racing wax alone, but is also often used as a base wax for other racing products. Recommended waxing iron temperature 165°C. - Liquid yet durable - Excellent as a topping base - Ensures a smooth glide in warm conditions - Swix’s TS-series liquid glide wax was recommended during the 2021 World Ski Championships
$60.00
Mount the Swix T0014HPS-2 on a drill with a minimum rotation speed of 1500 rpm. Then attach the brush to the handle. Move it in overlapping motions from the tip to the back.
$60.00
Great economy wax iron for alpine and nordic. Value for the money! 110 Volt. 1000 Watt. Great economy iron which is competitive with far more expensive models. Redesigned from scratch with an ergonomic body and a wide metal plate that suits both alpine, snowboard and nordic. Angled at one side to make it easier to keep a constant speed when melting the wax. The thick metal plate ensures a stable heating. Plate dimension 100x160 mm. Also available for 220 Volt (product # T77220).
$30.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About liquid HS6: A liquid training and competition slide wax that can be used alone or as a base for racing products. Specifically designed for cold conditions down to -12°C. At lower temperatures than this, traditional waxes are usually better than liquid products. HS6L is a versatile wax that works well in all snow conditions, but is at its best when humidity is high. How to apply HS6L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing universal glide wax - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions
$30.00
Liquid glide wax for racing and fast training sessions. HS7L is recommended from -2 to -8 degrees. - A very good glide wax for traditional winter conditions - No need for a waxing iron - Replaces CH7XL.
$30.00
HS liquid glide waxes are so easy to use that anyone can achieve a good result without having a dedicated waxing booth or lots of extra equipment. Glide wax spray is a popular choice for leisure skiers. High Speed (HS) is specially developed for younger racers and the ambitious leisure skier. All waxes in this series have high performance and good durability. This makes them an affordable option for both competition and training. About HS8L: A liquid training and racing wax that can be used alone or as a base for other glide products. The HS8L is extremely versatile on both sides of zero with very good feedback from racing service. It works just as well on old snow at minus temperatures as falling fresh snow and plus degrees. Quite simply a “must have” product for conditions you will encounter frequently. How to apply HS8L: Spray on the ski, wait 15 minutes and brush off with a T21 natural cork with felt. - Amazing glide wax that is easy to apply - For training and racing - Improves ski glide - Fluoro-free and 100% biodegradable - Also available as hot wax - Thoroughly tested in different conditions
$25.00
Ski cleaner for cleaning ski bases and removing wax and klister. First remove as much wax as possible using a scraper. Dampen a piece of Fiberlene with ski cleaner and rub until the wax/dirt is dissolved. Wipe with dry Fiberlene. The active ingredient in this liquid ski cleaner is low-aromatic hydrocarbon, which has a good effect on grease and dirt. The aerosol has a long shelf life and the ski cleaner is less flammable and less environmentally harmful than most other ski cleaning products. Practically odorless.
$25.00
Ø 0,12mm. Special developed for polish liquid waxes. Fine bristles that goes deep in the structure and make a smooth and glossy surface. Can be used as a final step polishing for all types of wax. - Red nylon brush - Perfect for HS liquid glider - Solid hand brush - High quality
Page 1 of 2 Next page